EWS850AP - первое решение EnGenius для наружного применения Wi-Fi 6. Новейшая 802.11ax ультра-скоростная точка доступа с OFDMA и MU-MIMO технологией для высокой плотности использования в разных применениях..
802.11ax and ac/a/b/g/n compliance
SMA Type interfaces
2.4 GHz: Two(2) detachable 5.0 dBi RP-SMA antennas
5 GHz: Two(2) detachable 5.0 dBi RP-SMA antennas
The alternative solution to compatible with SA2216 and SA5219 sector Antennas
One (1) 10/100/1000/2500 BASE-T RJ-45 Ethernet Ports
4 x RP-SMA Connector Interfaces
Display system and wireless transmission status
Maximum Power Consumption
802.3af/at Compliance Source
Active Ethernet (Power Over Ethernet, PoE)
Outdoor, IP67, dual radios concurrent, 5 GHz 802.11ax 2×2 MU-MIMO is backwards compatible with 802.11 ac/a/n mode, 2.4 GHz 802.11 ax 2×2 MU-MIMO is backwards compatible with 802.11 b/g/n.
Two(2) spatial streams SU-MIMO for 2.4 GHz and two(2) spatial streams SU-MIMO for 5 GHz up to a totally 1,774 Mbps wireless data rate to a single 11ax wireless client device under both 2.4 GHz and 5 GHz radio.
Two(2) spatial streams multi-user (MU)-MIMO for up to 1201 Mbps wire-less data rate to transmit to one(1) two streams MU-MIMO 11ax capable wireless client devices under 5 GHz simultaneously.
Two(2) spatial streams multi-user (MU)-MIMO for up to 574 Mbps wireless data rate to transmit to one(1) two streams MU-MIMO 11ax capable wireless client devices under 2.4 GHz simultaneously.
2.4 GHz: 2400 MHz ~ 2482 MHz
5 GHz: 5150 MHz~5250 MHz, 5250 MHz~5350 MHz, 5470~5725 MHz, 5725 MHz~5850 MHz
Support radios and channels will be varied in the configured regulatory domain.
802.11ax: Orthogonal Frequency Division Multiple Access (OFDMA)
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11ac/a/g/n: Orthogonal Frequency Division Multiple (OFDM)
802.11ax supports very high throughput (VHT) — HE 20/40/80 MHz
802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz
802.11n supports high throughput (HT) — HT 20/40 MHz
802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM)
802.11n/ac/ax packet aggregation: A-MPDU, A-SPDU
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
2.4 GHz: 23 dBm
5 GHz: 25 dBm
Maximum power is limited by regulatory domain
MU-MIMO allows multiple spatial streams to be allocated to different clients simultaneously on both download and upload sides.
Orthogonal frequency-division multiple access (OFDMA) allows a single transmission to be split by frequency within a channel.
Increasing signal reliability and transmitting distance.
BSS coloring marks different colors on each data which will allow client devices to stop receiving a frame and return to sleep mode as soon as they recognize these frames are not of interest to them.
The target wake time feature lets your devices to keep a radio receiver sleeping and wake it up as needed to receive periodic transmissions from an access point. The result is significant power-saving for battery-powered devices.
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2)
2.4 GHz: 9 to 574 (MCS0 to MCS11, NSS=1 to 2)
5 GHz: 18 to 1201 (MCS0 to MCS11, NSS=1 to 2)
Set the ACK timeout to assure the proper distance to deliver wireless signal properly
Scan signal level of an environment to provide parameters for performing Auto Transmit power and auto channel.
Automatically adjust the power level
Automatically assign a clear channel to perform RF transmission under a pervasive environment.
Collect the parameters of neighborhood Access Points to find the optimal AP.
Fast Roaming (802.11v)
Cognize the signal strength of client devices under each to steer these client devices to one of Access Points if the signal level is less than the default value of AP systems.
Steer client devices to a proper frequency band for getting more bandwidth and speed under an Access Point.
Kick client devices that the signal (RSSI) is above the set value from the AP for reducing the interference and optimize the connecting quality.
Support 8 SSIDs on both 2.4 GHz and 5 GHz bands.
Isolate each client for avoiding an unnecessary touch, leaking sensitive data, and enhancing Internet security and reliability. The function will only available on stand-alone mode.
Independent VLAN settings can be enable or disable. Any packet that enters the Device without a VLAN tag will have a VLAN tag inserted with a PVID (Ethernet Port VID).
Broadcast VLAN-tag packets to find the destination and deliver packets over the defined path. The functions allow network topology scalable and flexible.
Integrate VLAN ID with a SSID interface to forward packets over the defined path. The functions isolate client devices to get more security.
The feature is enabled with the specified VLAN ID, the device will only allow management access with the same specified VLAN ID from a remote location by using protocols such as telnet, SSH, SNMP, Syslog, etc.
Controls the bottle of bandwidth to offer the limited bandwidth for an individual SSID or each client per Access Point.
Provides a network monitoring tool for administrators to stay informed of the configuration change.
Save the customized configuration as the default value for different customer demands.
Perform a regular reboot on access point at the assigned schedule
Perform it to enable or disable 2.4GHz or 5GHz interface from a period of time.
Help operators to offload 3G to Wi-Fi seamlessly
Provide the list to display the real status of wireless client devices on this Access Point.
This function will allow client devices to discover wireless Access Point under an environment and to automatically exchange data for getting authorization on accessing the Internet when roaming between Access Points.
Operating: -20°C~60°C (-4°F~140°F)
Storage: -30°C~80°C (-22°F~176°F)
Operating: 0%～90% typical
Storage: 0%～90% typical
Weight: 720 g
Length: 7.48” (190 mm)
Width: 4.88”(124 mm)
Depth: 1.85(47 mm)
Subpart C 15.247
Subpart E 15.407
EN 300 328
EN 301 893
EN 301 489
|Radio||2.4 GHz & 5 GHz||2.4 GHz & 5 GHz||2.4 GHz & 5 GHz||2.4 GHz & 5 GHz|
|Max. Data Rates(2.4 GHz)||574 Mbps||450 Mbps||574 Mbps||1,148 Mbps|
|Max. Data Rates(5 GHz)||1,200 Mbps||1,300 Mbps||1,200 Mbps||2,400 Mbps|
|Max. Data Rates(6 GHz)||-||-||-||-|
|Radio Chains||2 x 2:2||3 x 3:3||2 x 2:2||4 x 4:4|
|Transmit Power on(2.4 GHz)||Up to 23 dBm||Up to 29 dBm||Up to 20 dBm||Up to 23 dBm|
|Transmit Power on(5 GHz)||Up to 23 dBm||Up to 29 dBm||Up to 20 dBm||Up to 23 dBm|
|Transmit Power on(6 GHz)||-||-||-||-|
|Antenna||4 x 5 dBi||3 x 5 dBi (2.4 GHz) Omni ; 3 x 7 dBi (5 GHz) Omni (Detachable)||2 x 3 dBi @ 2.4 GHz ; 2 x 3 dBi @ 5 GHz||4x 3dBi (2.4 GHz) Omni ; 4x 3dBi (5 GHz) Omni|
|Power-over-Ethernet||802.3af/at||802.3at (at in + af out)||802.3af/at||802.3at|
|Ethernet Ports||1 x 10/100/1000 Ethernet Port||2 x 10/100/1000 Ethernet Ports||1 x 10/100/1000 Ethernet Port||1 x 10/100/1000/2500 Ethernet Port|
|Mounting Type||Pole / Wall||Ceiling / Wall||Ceiling / Wall||Ceiling / Wall|
|Dimensions||190 x 124 x 47 mm||285 x 217.93 x 53.34 mm||160 x 160 x 26.9 mm||205 x 205 x 33.2 mm|
|Cloud To-Go app||-||-||-||-|
Network Management with ezMaster