EnGenius PoE Adapters are a combination of a regular AC / DC adapter and a PoE injector. You connect the adapter to the regular power network and connect an access point through an Ethernet cable. Using the built-in Power Over Ethernet Injector, the adapter provides the access point of power and data. The PoE adapters ensure secure data and power transfer: they protect the network from short-circuiting and overloading.
A PoE injector adds the feed to the data feed and sends it through an Ethernet cable to a PoE-compatible access point. You place the EnGenius PoE injector between the power supply and the access point: handy when there is no power outlet near the wireless device.
EnGenius transceivers are hot-pluggable. Connect the transceiver to your network equipment and experience high data transfer speeds over distances up to ten kilometers. The distance depends on the type of transceiver.
The EnGenius converter converts 48V 802.3at / off voltage to 24V power supply and supports PoE cabling up to 100m. Via Cat6, Cat5 and Cat5e cabling, you send 24V voltage to devices within your network.
Secure your outdoor network with EnGenius surge protector. The ESA-7600G, ESA-7500G and ESA-7500 also serve as a lightning protector and are suitable for Power Over Ethernet (PoE). The surge protector is simple and integral.
EnGenius antennas enhance the range of your wireless network. Replace the omnidirectional antennas of your current access points by a sector antenna and boost the signal within a range of 120 degrees. Install three for a total 360 degree coverage. The antennas have a range of almost three kilometers and are resistant to all weather types.